diff --git a/drivers/serial/serial_mtk.c b/drivers/serial/serial_mtk.c
new file mode 100644
index 0000000..bce1be8
--- /dev/null
+++ b/drivers/serial/serial_mtk.c
@@ -0,0 +1,268 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * MediaTek High-speed UART driver
+ *
+ * Copyright (C) 2018 MediaTek Inc.
+ * Author: Weijie Gao <weijie.gao@mediatek.com>
+ */
+
+#include <clk.h>
+#include <common.h>
+#include <div64.h>
+#include <dm.h>
+#include <errno.h>
+#include <serial.h>
+#include <watchdog.h>
+#include <asm/io.h>
+#include <asm/types.h>
+
+struct mtk_serial_regs {
+	u32 rbr;
+	u32 ier;
+	u32 fcr;
+	u32 lcr;
+	u32 mcr;
+	u32 lsr;
+	u32 msr;
+	u32 spr;
+	u32 mdr1;
+	u32 highspeed;
+	u32 sample_count;
+	u32 sample_point;
+	u32 fracdiv_l;
+	u32 fracdiv_m;
+	u32 escape_en;
+	u32 guard;
+	u32 rx_sel;
+};
+
+#define thr rbr
+#define iir fcr
+#define dll rbr
+#define dlm ier
+
+#define UART_LCR_WLS_8	0x03		/* 8 bit character length */
+#define UART_LCR_DLAB	0x80		/* Divisor latch access bit */
+
+#define UART_LSR_DR	0x01		/* Data ready */
+#define UART_LSR_THRE	0x20		/* Xmit holding register empty */
+
+/* the data is correct if the real baud is within 3%. */
+#define BAUD_ALLOW_MAX(baud)	((baud) + (baud) * 3 / 100)
+#define BAUD_ALLOW_MIX(baud)	((baud) - (baud) * 3 / 100)
+
+struct mtk_serial_priv {
+	struct mtk_serial_regs __iomem *regs;
+	u32 clock;
+};
+
+static void _mtk_serial_setbrg(struct mtk_serial_priv *priv, int baud)
+{
+	bool support_clk12m_baud115200;
+	u32 quot, samplecount, realbaud;
+
+	if ((baud <= 115200) && (priv->clock == 12000000))
+		support_clk12m_baud115200 = true;
+	else
+		support_clk12m_baud115200 = false;
+
+	if (baud <= 115200) {
+		writel(0, &priv->regs->highspeed);
+		quot = DIV_ROUND_CLOSEST(priv->clock, 16 * baud);
+
+		if (support_clk12m_baud115200) {
+			writel(3, &priv->regs->highspeed);
+			quot = DIV_ROUND_CLOSEST(priv->clock, 256 * baud);
+			if (quot == 0)
+				quot = 1;
+
+			samplecount = DIV_ROUND_CLOSEST(priv->clock,
+							quot * baud);
+			if (samplecount != 0) {
+				realbaud = priv->clock / samplecount / quot;
+				if ((realbaud > BAUD_ALLOW_MAX(baud)) ||
+				    (realbaud < BAUD_ALLOW_MIX(baud))) {
+					pr_info("baud %d can't be handled\n",
+						baud);
+				}
+			} else {
+				pr_info("samplecount is 0\n");
+			}
+		}
+	} else if (baud <= 576000) {
+		writel(2, &priv->regs->highspeed);
+
+		/* Set to next lower baudrate supported */
+		if ((baud == 500000) || (baud == 576000))
+			baud = 460800;
+		quot = DIV_ROUND_UP(priv->clock, 4 * baud);
+	} else {
+		writel(3, &priv->regs->highspeed);
+		quot = DIV_ROUND_UP(priv->clock, 256 * baud);
+	}
+
+	/* set divisor */
+	writel(UART_LCR_WLS_8 | UART_LCR_DLAB, &priv->regs->lcr);
+	writel(quot & 0xff, &priv->regs->dll);
+	writel((quot >> 8) & 0xff, &priv->regs->dlm);
+	writel(UART_LCR_WLS_8, &priv->regs->lcr);
+
+	if (baud > 460800) {
+		u32 tmp;
+
+		tmp = DIV_ROUND_CLOSEST(priv->clock, quot * baud);
+		writel(tmp - 1, &priv->regs->sample_count);
+		writel((tmp - 2) >> 1, &priv->regs->sample_point);
+	} else {
+		writel(0, &priv->regs->sample_count);
+		writel(0xff, &priv->regs->sample_point);
+	}
+
+	if (support_clk12m_baud115200) {
+		writel(samplecount - 1, &priv->regs->sample_count);
+		writel((samplecount - 2) >> 1, &priv->regs->sample_point);
+	}
+}
+
+static int mtk_serial_setbrg(struct udevice *dev, int baudrate)
+{
+	struct mtk_serial_priv *priv = dev_get_priv(dev);
+
+	_mtk_serial_setbrg(priv, baudrate);
+
+	return 0;
+}
+
+static int mtk_serial_putc(struct udevice *dev, const char ch)
+{
+	struct mtk_serial_priv *priv = dev_get_priv(dev);
+
+	if (!(readl(&priv->regs->lsr) & UART_LSR_THRE))
+		return -EAGAIN;
+
+	writel(ch, &priv->regs->thr);
+
+	if (ch == '\n')
+		WATCHDOG_RESET();
+
+	return 0;
+}
+
+static int mtk_serial_getc(struct udevice *dev)
+{
+	struct mtk_serial_priv *priv = dev_get_priv(dev);
+
+	if (!(readl(&priv->regs->lsr) & UART_LSR_DR))
+		return -EAGAIN;
+
+	return readl(&priv->regs->rbr);
+}
+
+static int mtk_serial_pending(struct udevice *dev, bool input)
+{
+	struct mtk_serial_priv *priv = dev_get_priv(dev);
+
+	if (input)
+		return (readl(&priv->regs->lsr) & UART_LSR_DR) ? 1 : 0;
+	else
+		return (readl(&priv->regs->lsr) & UART_LSR_THRE) ? 0 : 1;
+}
+
+static int mtk_serial_probe(struct udevice *dev)
+{
+	struct mtk_serial_priv *priv = dev_get_priv(dev);
+
+	/* Disable interrupt */
+	writel(0, &priv->regs->ier);
+
+	return 0;
+}
+
+static int mtk_serial_ofdata_to_platdata(struct udevice *dev)
+{
+	struct mtk_serial_priv *priv = dev_get_priv(dev);
+	fdt_addr_t addr;
+	struct clk clk;
+	int err;
+
+	addr = dev_read_addr(dev);
+	if (addr == FDT_ADDR_T_NONE)
+		return -EINVAL;
+
+	priv->regs = map_physmem(addr, 0, MAP_NOCACHE);
+
+	err = clk_get_by_index(dev, 0, &clk);
+	if (!err) {
+		err = clk_get_rate(&clk);
+		if (!IS_ERR_VALUE(err))
+			priv->clock = err;
+	} else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) {
+		debug("mtk_serial: failed to get clock\n");
+		return err;
+	}
+
+	if (!priv->clock)
+		priv->clock = dev_read_u32_default(dev, "clock-frequency", 0);
+
+	if (!priv->clock) {
+		debug("mtk_serial: clock not defined\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct dm_serial_ops mtk_serial_ops = {
+	.putc = mtk_serial_putc,
+	.pending = mtk_serial_pending,
+	.getc = mtk_serial_getc,
+	.setbrg = mtk_serial_setbrg,
+};
+
+static const struct udevice_id mtk_serial_ids[] = {
+	{ .compatible = "mediatek,hsuart" },
+	{ .compatible = "mediatek,mt6577-uart" },
+	{ }
+};
+
+U_BOOT_DRIVER(serial_mtk) = {
+	.name = "serial_mtk",
+	.id = UCLASS_SERIAL,
+	.of_match = mtk_serial_ids,
+	.ofdata_to_platdata = mtk_serial_ofdata_to_platdata,
+	.priv_auto_alloc_size = sizeof(struct mtk_serial_priv),
+	.probe = mtk_serial_probe,
+	.ops = &mtk_serial_ops,
+	.flags = DM_FLAG_PRE_RELOC,
+};
+
+#ifdef CONFIG_DEBUG_UART_MTK
+
+#include <debug_uart.h>
+
+static inline void _debug_uart_init(void)
+{
+	struct mtk_serial_priv priv;
+
+	priv.regs = (void *) CONFIG_DEBUG_UART_BASE;
+	priv.clock = CONFIG_DEBUG_UART_CLOCK;
+
+	writel(0, &priv.regs->ier);
+
+	_mtk_serial_setbrg(&priv, CONFIG_BAUDRATE);
+}
+
+static inline void _debug_uart_putc(int ch)
+{
+	struct mtk_serial_regs __iomem *regs =
+		(void *) CONFIG_DEBUG_UART_BASE;
+
+	while (!(readl(&regs->lsr) & UART_LSR_THRE))
+		;
+
+	writel(ch, &regs->thr);
+}
+
+DEBUG_UART_FUNCS
+
+#endif
\ No newline at end of file